DETAIL B
B
Minden Machine Shop Inc.
1302 K Road Minden, NE
308-832-0220
S
LID
E S
PO
OL
WIRE SPOOL
RETAINING CLIP
CHANGING A WIRE SPOOL
1.
WHEN THE WIRE SPOOL HAS THE DESIRED AMOUNT OF WIRE ON
IT, IT WILL NEED TO BE REPLACED WITH AN EMPTY WIRE SPOOL.
2.
DISENGAGE THE DRIVE AND THE ENGINE MUST BE TURNED OFF
3.
REMOVE THE WIRE SPOOL RETAINING CLIP
4.
SLIDE THE WIRE SPOOL OFF AND STORE IN AN APPROPRIATE
LOCATION
5.
SLIDE AN EMPTY WIRE SPOOL ONTO THE SHAFT AND ALIGN THE
RETAINING HOLE WITH THE SHAFT HOLE
6.
REPLACE THE RETAINING CLIP AND LOCK INTO PLACE TO KEEP
THE WIRE SPOOL IN PLACE
7.
THE WIRE WINDER IS READY TO WIND MORE WIRE
WIRE SPOOL ATTACHING AND
DETACHING
WIRE SPOOL INSTALL
1.
REMOVE THE RETAINING CLIP FROM THE
SHAFT
2.
SLIDE THE WIRE SPOOL ONTO THE SHAFT
AND ALIGN THE RETAINING HOLE OF THE
SPOOL WITH THE HOLE OF THE SHAFT
3.
INSERT AND LOCK THE RETAINING CLIP TO
KEEP WIRE SPOOL IN PLACE
WARNING!
WHEN INSTALLING OR CHANGING
THE WIRE SPOOL, ALWAYS HAVE
THE DRIVE DISENGAGED AND
THE ENGINE OFF!
Wire Winder 6500 V2024.1
15
Содержание 6500
Страница 13: ...Operation Wire Winder 6500 V2024 1 13...
Страница 20: ...Parts Diagrams Wire Winder 6500 V2024 1 20...