2
3
A
B
C
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIOS
PREPARATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
• Do not plug in lamp to power before installation is complete.
• CAUTION- this portable lamp has a polarized plug (one blade is wider than the other)
as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized
outlet only one way. if the plug does not fit fully in the outlet, reverse the plug. if it still
does not fit, contact a qualified electrician. never use with an extension cord unless plug
can be fully inserted. do not alter the plug. AC ONLY.
• Be careful not to damage or cut the wire insulation (covering) during fixture
installation. Do not permit wires to contact any surface having a sharp edge.
To do so may damage or cut the wire insulation, which could cause serious
injury or death from electric shock.
•
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product and
the hazards involved.
CAUTION
• All electrical connections must be in agreement with local codes, ordinances or
the national electric code (NEC). Contact your municipal building department to
learn about your local codes, permits and/or inspections.
• Risk of fire – most dwellings built before 1985 have supply wire rated for 140°F/60ºC.
Consult a qualified electrician before installation.
• Do not connect this fixture to an electrical system that does not provide a means for
equipment grounding. Never use a fixture in a two-wire system that is not grounded.
If you are not sure your lighting system has a grounding means, do not attempt to
install this fixture. Contact a qualified, licensed electrician for information with regards
to proper grounding methods as required by the local electrical code in your area.
Before beginning assembly, installation or operation of product, make sure all parts
are present. Compare parts with package contents list and diagram on previous page.
If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Switch
1. Remove spinner nut (AA) from socket.
Position cover (B) and glass (C) on lamp (A) and secure with spinner nut (AA).
2. Install specified bulb (BB) type and wattage.
AA
BB