Turn the switch
underneath the top of
the solar head to the
“ON” position
Remove the
protective film
from the solar
panel
Turn the switch
underneath the
top of the solar
head to the
“ON” position
Remove the
protective film
from the solar
panel
Make sure the solar panels are not covered by dust, snow and debris.
Clean it with a soft damp cloth or paper towel periodically. Avoid the use
of abrasive cleaning agents
.
Use only rechargeable "AA" batteries for your solar lights. Replace a new
battery of the same size each year for optimum performance.
Attention: Do not dispose of batteries in fire. Batteries may explode
or leak.
INSTALLATION
1) Carefully take the solar post cap out of the box.
2) Post-top mount:
3) Flat Surface/ Railing (Without Insert)
Note:
The post to be installed with your post cap should be higher than 1 foot for
the lantern to receive maximum sunlight.
OPERATION
1) For daily operation, turn the switch
to the “ON” position
2) You solar post cap will automatically turn on once it gets dark.
3) The performance of the solar post cap will vary with the time of year. It
will deliver more light when it has had a full day in the sun rather than a
day in overcast weather.
