7
1. With the help of an assistant, lift the Back Frame assembly and place it onto the
Az-El assy as shown. Attach using 1” x 6” bolt, flat washer, lockwasher and nut.
2. Assemble the Elevation Rod as shown using 3/4” nuts, washers(large USS) on
each side of the elevation pivot block, and 1/2” x 1 1/2” bolts, nuts, and washers.
Back Frame to Mount assembly
1
.
With the help of an assistant, lift Reflector assembly and place it onto the Back
Frame as shown. Use 3/8” x 1” bolts/washers to fasten. Tighten hardware after all
bolts are in place.
Reflector assembly
3/8” x 1” bolts/washers (8)
Back Frame
assy
Elevation
Rod
Elevation
Pivot
Block
Az-El
assy
Large USS 3/4”
Washers (2)
1/2” x 1 1/2” bolts, nuts,
and washers.(2 )
1” x 6” bolt, flat washer,
lockwasher and nut.
