MANUAL
21846
AILONET 100
6.6.2002
AILONET USER MANUAL
Done
Copyright
Patria Ailon Oy 2002. All rights reserved.
5/24
1.2
Physical Interfaces
1.2.1 Connectors
All wire connectors are located on the bottom of Ailonet.
Ethernet (on the left) supports 10BASE-T and 100BASE-TX
connections, so it works with all modern Ethernet switches,
hubs, PC Ethernet cards, ADSL and cable modems. When
connecting Ailonet directly to a computer, use a special
twisted Ethernet cable.
Serial port (in the middle) supports RS-232 standard with
CTS/RTS handshake. The maximum speed of the serial port
is 115 kbps. Serial port can be used for initial setup or for
connecting external peripherals such as X10 controller.
Power input (on the right) accepts 8-14 VDC and supports
center negative feed.
PC Card slot can be found from behind of Ailonet. It supports
16-bit PCMCIA PC Cards. Cards must be installed and
removed when Ailonet is off. Refer to section “Supported PC
Cards” for further information about PC Card compatibility.
1.2.2 Indicators
The left-most led marked with a phone ear piece in this
revision of SW indicates a Bluetooth connection.
The led in the middle is power for indication. If the led blinks,
Ailonet is either starting up or shutting down.
The right-most led indicates for Ethernet connection. If the
led is lit half bright Ethernet link to network is established. If
the led blinks, data is been transferred.
