background image

Important Notice:

1. The display of transmitter stays on for approximate 6 seconds 

after a button press.After 6 seconds with no button press,the 

blue backlight shuts off first, and if no button press with another 

50 seconds,the display shuts off and the transmitter goes into 

sleel mode with atuto-vibration,pressing any button with auto-

vibration will turn the display back on.

2.The receiver will be into shallow sleep mode if stop working for 

5 seconds,and if without any operation for 50 seconds,it will be 

into deep sleep mode, Any commands from the transmitter will 

activate the receiver.

3.Press"A B"button for selection. Channel A controls the first 

    receiver and Channel B controls the second receiver. Channel 

    A B controls both the two receiver.

4. The design of the receiver is rainproof. The rubber cover 

    has to be put in the right position to ensure rainproof effect. 

5. Test static stimulation function

1) Place the Test bulb to the metal screws (ensure the mental

    points are attached when test the stimulation function).

2) Press the “Static Stimulation" button, and the LED light will 

flash on.

6. How to find the bestVibration/Stimulation Level?

The level of Vibration/Stimulation best suited for your dog

depends on your dog's temperament and threshold

for Vibration/Stimulation. Always start at the lowest level

and work your way up.

The appropriate level can be found when the dog

responds to the Vibration/Stimulation with a mild reaction,

such as a tensing of the neck muscles. The Vibration

/Stimulation Level may vary depending on the training

situation. When highly distracted, dogs will require a

higher level of Vibration/Stimulation

Frequently Asked Questions

Q

Is the Vibration/Stimulationsafe for my pet?

A: 

While the Vibration/Stimulation is unpleasant, it is harmless to 

your pet. Electronic training devices require interaction and 

training from the owner to achieve desired results. 

Q: 

How old does my pet have to be before using the Remote 

Training Collar?

A: 

Your pet should be able to recognizebasic obedience commands 

such as “Sit” or “Stay”. Pets should be at least 6 months old before 

using the Training Collar.

Q: 

Once my pet is trained and has been obeying my commands, 

will he have to continue to wear the Receiver Collar?

A: 

Probably not. You may need to reinforce training with the 

Receiver Collar from time to time.

Q: 

Is the Receiver Collar waterproof? 

A:

 It's water resistant/rainproof. Be sure to keep the rubber cover 

put in the right position and do not make the dog swim in water.

Q: 

How long can I continuously deliver Vibration/ Stimulation to 

my pet?

A: 

The maximum amount of time you can press the Stimulation 

Button

and deliver Stimulation to your pet continuously is 5 seconds. And 

the maximum amount of time you can press the Vibration Button

and deliver Vibration to your pet continuously is 10 seconds

After this, Vibration/Stimulation cannot be delivered until You 

release and press the button again.

Q:

How long should I process my training session for my pet?

A:

Training sessions should be kept positive and short ,it is better 

    for about 10-15 minutes each time.

8

9

Содержание T600









Отзывы: