Patpet T144, Руководство пользователя, Страница: 12 / 15

12
Step 3: Turn on the receiver
Press the power button to turn on the receiver (see Picture 3), and the
LED indicator on the receiver will flash (see Picture 4)
（
3
） （
4
）
Step 4: Remote receiver signal to complete synchronizing.
Press the power button and hold for 3 seconds, the LED indicator on
the receiver will flickering alternately red and green (see picture 5).
The receiver is ready for pairing, then press the vibration and Beep
button at the same time, and a beep from receiver means
synchronizing finishes. Now please start to enjoy your dog training
collar.
（
5
） （
6
）
PS: If you buy 2-dog system, you can pair the two collars on channel
1 and channel 2 separately. Follow step 1 to synchronize two
receivers separately. You can use 1/2 button on the remote to control
different dogs separately.