13
5.
If you now press the „CH/GRP“ button a second time while the display is flashing, you will exit
the setting mode and the current menu.
Note: If you do nothing while the display is flashing, the setting mode will automatically end after 10
seconds.
6.4. Switching on/off with the remote control
1. Switch on the remote control.
2. Press the „ON/OFF“ button (product overview FB no. 5).
3. Press the „ON/OFF“ button again, the PATONA Premium Photo / Video Soft Light 3.0 should
now switch on or off.
6.5. Adjusting the brightness with the remote control
1. Switch on the remote control.
2. Press the setting key „+“ or „-“ to change the brightness. The maximum value is 100 %, the mini-
mum value is 1 %.
Note: If you keep the setting key „+“ or „-“ pressed longer, the values change in 5 % steps.
6.6. Setting the colour temperature with the remote control
1. Switch on the remote control.
2. Press the selection/setting key „SET“ on the remote control. The current colour temperature
value should now flash continuously on the display. Press the setting key „+“ or „-“ to increase or
decrease the colour temperature. You can change the value by 100 K at a time. The maximum
value for the colour temperature is 8500 K, the minimum value is 2500 K.
Note: If you keep the setting key „+“ or „-“ pressed longer, the value changes in 200 K steps.
7. Technical data
Dimensions
L 376 mm, H 266 mm, W 25 mm
Input voltage
7.4 – 16.8 V
Weight
1170 g
Storage temperatur
-10 °C – 50 °C
Max. Humidity
20 % – 90 %
Max. Ambient temperature
0 °C – 40 °C
Number of LEDs
144 pieces up to 8500 K
144 pieces up to 2500 K
Power supply via rechargeable battery
up to 2 batteries of the NP-F series
Power supply via mains adapter
2.5 inch DC plug (15 V 3 A max.)
Max. Illuminance
1000 lx / 1 m (± 200 lx)
Colour rendering index
CRI > 95
Colour temperature
2500 K up to 8500 K (± 200 K)
Power
max. 40 W
Luminous flux
2600 lm ± (200 lm)
