Paton ProMIG-200 Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 130

background image

- 107 -

PATON

ProMIG

DC MMA/TIG/MIG/MAG

4.2 SHIELDING GAS PRE-PURGE FUNCTION

This function is necessary to protect the welding zone from the harmful effects of

atmospheric air, and consists in pre-purging the welding zone with shielding gas before
striking the welding arc. By default, the "pre-purge time" [t.Pr] is set to 0.1 sec; this value can
be changed at any time at your discretion. See paragraph 6.1 to change the value of any
function in the current welding mode.

4.3 SHIELDING GAS POST-PURGE FUNCTION

This function consists in the post-purging of the welding zone with a shielding gas

after the welding arc is extinguished, since the hot weld pool is afraid of the harmful effects
of atmospheric air for some time. By default, the post-purge time [t.Po] is set to 1.5 seconds;
this value can be changed at any time at your discretion. See paragraph 6.1 to change the
value of any function in the current welding mode.

4.4 PRE-CURRENT FUNCTION (PILOT ARC)

This function is required for the convenience of using the torch at the time of arc

striking. It allows you to start the welding process with low current values, the value of which
only maintains the process, but does not introduce significant heat input and does not burn
the workpiece through. It is possible to preheat the weld spot when using the TIG-4T button
mode. By default, the pre-current [Pr.A] is set at 20A. See paragraph 6.1 to change the value
of any function in the current welding mode.

4.5 CRATER FILLING CURRENT FUNCTION

This function is necessary to indicate the level to which the current drops at the end

of the welding process. It is necessary for crater filling if the TIG-4T button mode is used (with
the second press of the torch button). By default, the crater filling current is set at 20A. See
paragraph 6.1 to change the value of any function in the current welding mode.

4.6 WELDING CURRENT BUILD-UP FUNCTION

This function, in addition to saving the life of the electrode and, to some extent, the

torch itself, is also necessary for the convenience of using the torch. This eliminates the
formation of the initial splashing of the weld pool, as well as for the set time of current build-
up [t.uP], in the case of the TIG-2T button mode, you can accurately direct the torch to the
desired welding location, since the arc striking location in particularly critical workpieces is
not always located at the welding location. This function can also be used to preheat the
welding location. By default, it is set to OFF

–

disabled. See paragraph 6.1 to change the value

of any function in the current welding mode.

4.7 WELDING CURRENT RAMP-DOWN FUNCTION

This function is necessary to improve the process of filling the crater formed under

the pressure of the main working current of the welding arc, and such a crater is the nucleus

«
...
106
107
108
109
110
...
»

Содержание ProMIG-200



































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProMIG-200

Бренд: M86 Security Страницы: 86

Бренд: quadient Страницы: 2

Бренд: VENCO Страницы: 4

MODULEX EXT Series

Бренд: Unical Страницы: 52

Бренд: Uniden Страницы: 12

Total Solutions TSS-800

Бренд: Infinity Страницы: 26

Oerlikon CITOCUT 25C

Бренд: Air Liquide Страницы: 68

Бренд: EAW Страницы: 2

Бренд: TeleCare Страницы: 8

Magnum Alert-900

Бренд: NAPCO Страницы: 76

Бренд: THIESEN Страницы: 2

Бренд: Ecco Страницы: 4

MOVIE CD 1500 - TEST NEWS

Бренд: Canton Страницы: 1

Бренд: Comelit Страницы: 56

Бренд: Campbell Hausfeld Страницы: 48

Бренд: Sonos Страницы: 15

Бренд: Vista Страницы: 16

TRANSTIG 200 AC/DC

Бренд: CIGWELD Страницы: 128

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды