Patlite WDT-4LR-Z2 Скачать руководство пользователя страница 23

Страница: 23 / 61

Wireless Data Acquisition System Instruction Manual

6.2 About the Installation Environment

(1)

Installation Environment Main Points



There are five essential points to consider at installation.

Item

Description

◆

There is no influence in radio waves at the installation site. Also, the radio waves at the installation site
should not change over time.

Refer to

☞

"6.2(1-1) About the Influence of Surrounding Radio Waves"

◆

The distance between devices (WDR, WDT) does not exceed recommendations.

Refer to

☞

"6.2(1-2) Distance Between Devices"



The recommended distance between all WDT and WDR is within line of sight.

◆

Line of sight between each device (WDR, WDT).



To ensure good line of sight, the location should not be cluttered and should be free of any obstacles.

Refer to

☞

"6.2(1-3)

Ensuring Line of Sight

”

◆

WDR placement is appropriate.



Install in a location as high as possible.



And away from obstacles that could disrupt radio waves.

Refer to

☞

"6.2(1-4) WDR Installation Position and Obstacles"

◆

Each device is always powered, and the mesh network is always available.



If power is not available for one of the WDT, the communication path could get interrupted and

information may not be transmitted.

Содержание WDT-4LR-Z2






























































Результаты поиска

Содержание WDT-4LR-Z2

Отзывы:

Бренды по названию

Популярные бренды

Patlite WDT-4LR-Z2, Инструкция по эксплуатации

Результаты поиска

Содержание WDT-4LR-Z2

Отзывы:

Бренды по названию

Популярные бренды