Patlite WD-Z2 Series, Руководство по установке

Страница: 32 / 47

WD-Z2 Series Installation Guidelines Rev.5
- 32 -
(3) Check transmitter/receiver connections and .csv log file
The receiver list appears in the WD List window (as shown below), and the transmitters are
displayed in a tree configuration.
Check that all receivers and transmitters are connected, then check that the transmitters are
connected to their designated receivers.
When clicking “Open CSV File”, the CSV file opens so that it can be checked.
CAUTION
- By opening the CSV file directly, the operation log data may not be updated.
- When checking the CSV file during WDS-AUTO2 operation, always copy the file to another location and
open the copied file when checking.
Note
- If the receiver icon shown on the left appears, the receiver is not connected properly.
- Check that the receiver power is on, the LAN wiring is correct, and the correct IP address is
specified.
This completes the initial system operation check.
Establish a test operation period of at least one week and check the
operation log data to ensure proper setup.