Box Mount
Before proceeding to install
using the Box-Mount method,
check that the tower has
sufficient clearance so it does
not contact the wall.
Caution
(Prohibited)
1. On the front cover, back out the captive screw at
each corner and separate the front & back half of
the box.
2. Loosen the pole nut if necessary and turn the
angle bracket 90
O
either direction. Be careful not
to over-tighten the nut as it may break the
enclosure.
3. Choose a configuration so that the tower will not
interfere with the vertical mounting surface.
4. Make sure there is an AC outlet within reach
(1500mm) of the plug-in style power supply.
5. See the dimensions provided to position and drill
the mounting holes.
6. Mount the box by inserting user-supplied
mounting hardware into the holes provided
through the back half of the box.
7. Keep the front & back half of the box aligned and
tighten the captive screws at each corner. Be
careful not to pinch the wiring.
6
1
2
1500mm
4
3
5
7
5. Operation
LED Light Tower Operation without Flashing / Alarm Capability
1. Plug in the wall-plug-style power supply into the AC outlet supplying
the correct AC voltage level per the specifications of this product.
2. Each switch is color-coded to correspond to the color of the
corresponding LED light on the tower.
3. Turn the 3-position rotary switch on the enclosure to the left to turn
on the tower light in steady mode.
4. Turn the 3-position rotary switch on the enclosure to the center to
turn the tower light OFF.
5. Turn the 3-position switch to the right to turn on the tower light in
flashing mode.
6. Turn the gray 3-position switch on the enclosure to the left to select
Alarm 1 (fast beep)
7. Turn the gray 3-position switch on the enclosure to the center to
turn the alarm off.
8. Turn the gray 3-position switch on the enclosure to the right to
select Alarm 2 (slow beep)
LED Light Tower Operation with Flashing / Alarm Capability
1. Plug in the wall-plug-style power supply into the AC outlet supplying
the correct AC voltage level per the specifications of this product.
2. Each switch is color-coded to correspond to the color of the
corresponding LED light on the tower.
3. Turn the 3-position rotary switch on the enclosure to the left to turn
on the tower light in steady mode.
4. Turn the 3-position rotary switch on the enclosure to the center to
turn the tower light OFF.
5. Turn the 3-position switch to the right to turn on the tower light in
flashing mode.
6. Turn the gray 3-position switch on the enclosure to the left to select
Alarm 1 (fast beep)
7. Turn the gray 3-position switch on the enclosure to the center to
turn the alarm off.
8. Turn the gray 3-position switch on the enclosure to the right to
select Alarm 2 (slow beep)
Do not operate the switches with excessive force. There is the risk of
breaking the switch components.
Caution
(Prohibited)
-3-
-4-
6. Specifications
Rated Voltage
Operating Voltage
Mounting Location
DC24V (No polarity)
Rated V/- 10%
Indoor use only, Flat wall surface without vibration
PATLITE (U.S.A) CORPORATION ("PATLITE") warrant its products to be free from
defects in material and workmanship under normal and proper use for a period of one
(1) year from the initial date of shipment by PATLITE. In the even of a defect not
caused by misuse or damage to the products, PATLITE will, at its option, repair,
replace or return the purchase price for, defective products upon PATLITE's
inspection. THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES, REMEDIES AND CONDITIONS, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL PATLITE OR THE MANUFACTURER BE LIABLE
FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING
LOSS OF PROFITS OR "DOWN TIME" DAMAGES, WHETHER ARISING FROM
NEGLIGENCE, TORT, STRICT LIABILITY, CONTRACT, WARRANTY OR
OTHERWISE. IN NO EVENT SHALL PATLITE OR THE MANUFACTURER BE
LIABLE FOR PUNITIVE OR EXEMPLARY DAMAGES.
Limited Warranty:
PATLITE USA Corporation
20130 S. Western Avenue
Torrance, CA 90501
TEL: 888-214-2580
FAX: 310-328-2676
Web Site:
www.patlite.com
Sales: [email protected]
PATLITE Corporation disclaims all liability for any malfunction or
damage that occurs as a result of handling contrary to the
instructions, cautions and warnings mentioned in this manual.
Specifications may change without notice due to continual product
improvement.
Caution
(Prohibited)
Buy: www.ValinOnline.com | Phone: 844-385-3099 | Email: [email protected]
