USB Controlled Multicolor Signal Beacon User Manual
19
(1) NE-SN-USB/NE-ST-USB
（
direct mount / magnetic mount
）
No.
Process
1
Attach the slip-proof sheet to the product.
When installing the product, make sure to
align the ▲ mark on the product and the
non-slip sheet.
2
Attach the product to the mounting
surface.
*When mounting the NE-SN-USB and
NE-ST-USB magnetically, it should be
placed on a flat metal surface that has
magnetic properties. It is also
recommended to install it at a height of
2m or less.
(2) NE-SN-USB/NE-ST-USB
（
screw mounting
）
No.
Process
1
Remove the non-slip sheet from the product.
*When the non-slip sheet is installed, the screw holes are hidden and cannot be used.
2
Attach this product to a tripod.
*Do not use screws with a length of 5.5mm or longer. Do not use a screw with a length of
5.5mm or longer, as this will not secure the product firmly to the tripod and may damage the
product.
*The mounting method varies depending on the tripod. Refer to the instruction manual of the
tripod to be used.
