MEMO
-2-
-3-
Type : LU7-XE
Signal Tower
2. Model No. configuration
3. Parts name and Dimensions
INSTALLATION MANUAL
L U 7 - X E - □
■
LED color
R:Red
Y:Amber
G:Green
B:Blue
C:White
■
LED STROBE unit
( Unit:mm )
Thank you for specifying the PATLITE Signal Tower for your application. Please read these instructions carefully before
you perform installation, maintenance and repair. Store this manual carefully for easy reference. If you have any
questions about this product, please contact PATLITE Corporation.
1. To operate this product safely, please observe the following
●
Make sure the power is OFF before wiring. Wrong wiring may result in a cause of short circuit or electric shock.
●
Make sure the power is OFF to avoid an electric shock or burn when repair or replace the parts.
●
If installing this product requires construction work, please ask to a specialist in order to avoid a risk of an electric shock,
fire or fall.
●
When this product is used for security purposes, it should be inspected daily. In case a malfunction should occur,
it is recommended that you use this product together with other security products.
●
Be careful not to hold the product to climb any machines attached the product to also be careful not to catch the cover of
machine on this product when you remove the cover, as it may cause of falling down or drop.
Warning
●
LED STROBE unit is suitable only for BASE unit [LU7-02(FB)]. It does NOT work with BASE unit [LU7-M2(FB)].
●
LED STROBE unit should be operated in [Continuous light] mode. If it is operated in [Flashing] mode, it will NOT operate
correctly.
●
Do not substitute parts of units from other products. It may cause a breakdown.
● T
his product can be used only indoors. (Do not use it outdoors.)
●
Do not use or keep without LED unit or Head cover installed.
Caution
NOTES TO BE OBSERVED FOR SAFE OPERATION
Notes to be followed to prevent any damage to the user and other personnel or to assets are as follows:
■
The indications for warning are divided into the following classes according to the degree of danger or
damage incurred when the warning is not taken into consideration and the product is not corrently used.
Warning
Caution
Indicates an imminently dangerous condition: failure to follow
the instructions may lead to death or serious injury.
Indicates a potentially dangerous condition: failure to follow
the instructions may lead to slight injury or property damage.
※
Refer to "4. Unit reformation" to
assemble the each unit.
φ70
LED STROBE unit
48.9
●
Turn the power OFF before performing unit reformation.
●
First make sure the O-ring is mounted as shown in Drawing 1,then align
the locating mark of each unit,and place the units together in the direction
of the arrow (
①
) as shown.
●
Rotate the upper unit in the direction of the arrow(
②
).(Refer to Drawing.2)
4. Unit reformation
Caution
●
Do not remove a LED STROBE unit forcibly. It may damage the unit.
●
Do not warp or damage the LED STROBE unit to a lower unit.
●
Never attempt to tighten the Screw until the locating mark is aligned
with the arrow as shown in Drawing 2.
Drawing.1
Drawing.2
1
2
2
a
O ring
5. Specifications
LU7-XE-R
LU7-XE-Y
LU7-XE-G
LU7-XE-B
LU7-XE-C
24V DC
Mass
Model
Rated voltage
Power
consumption
(Peak)
［
LED unit
］
10.5W
10.0W
70g
6.0W
■
Parts name
■
Dimension
