The product contains a hidden push button (Refer to Part Names and Outer Appearance (P. 18))in the upper
section, which can be operated as follows:
- Alarm Sound Control …… Adjustable up to four steps.
- LED Color Change ……… The luminescence color of each tier can be changed.
- Version Confirmation …… The current version of the product can be checked.
- Product Initialization ……… The memory contents of the product can be cleared and returned to factory default values.
(Returns to the Signal Tower setup mode. The alarm sound pattern and the "Smart Mode" setup data have not changed.)
Volume
Large
Push Button
Push Button
Push Button
Push Button
Push Button
Volume
Medium
Volume
Small
Mute
■Setup Button Operation Method (Alarm Sound Control)
If a problem occurs, check the following table to remedy the problem before calling for service.
Even after the above-mentioned symptoms were checked, but the problem is not solved, refer to the back of
this book to fill out the "Product Specification Details for Inquiry" before contacting your nearest Patlite Sales
Representative or our Technical Support.
Problem
Where to Check
Inspection Repair
Is the electric wiring connected correctly?
Is the power properly supplying the correct voltage?
Be sure to use 24VDC.
Is the setup data correct?
Check that the contents of the setup data is correct.
Is the setup data correct?
Check that the contents of the setup data is correct.
Is the setup data correct?
Check that the contents of the setup data is correct.
Is the setup data correct?
Check that the contents of the setup data is correct.
The LED does not
light up.
Is the electric wiring connected correctly?
Is the power properly supplying the correct voltage?
Be sure to use 24VDC.
Check that the product type has a alarm
included or not.
The alarm does not
sound.
The alarm volume is
too low.
Is the electric wiring connected correctly?
Check that the product type has a alarm
included or not.
The LED does not
flash.
Only products with added to the part
number include the alarm function.
B
Priority is given to the lighting input over the flashing
input when simultaneous signals are applied.
Is the electric wiring connected correctly?
A different LED tier
from what I thought
lights up when I
make it turn on.
No.
Is the alarm volume set to minimum?
Refer to Setup Button Method (->P.25)
on how to adjust the volume.
Are the external contacts for lighting turning on?
<Product Specification
details for Inquiry>
Product Name
Model
Signal Tower
(→ Model Number Configuration" (P. 17))
Purchase Date
Symptoms of Problem
Year/Month/Day
With as much detail as possible.
2
1
2
3
4
5
To find out more about operation methods other than "Alarm Sound Control",
visit our company's homepage (http://www.patlite.com) for further details.
25
Standard
Mode
Only products with added to the part
number include the alarm function.
B
How to use the "Setup Button"
7
3
Troubleshooting
8
Refer to Wiring (->P.22, 23). to verify
wiring is correct.
5
7
Refer to Wiring (->P.22, 23). to verify
wiring is correct.
5
Refer to Wiring (->P.22, 23). to verify
wiring is correct.
5
Refer to Wiring (->P.22, 23). to verify
wiring is correct.
5
26
Specifications
9
Specifications
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
LA6-3DLJ□N
930g
LA6-5DLJ□N
1040g
LA6-3DLJ□B
980g
LA6-5DLJ□B
1090g
LA6-3DWJ□N
400g
LA6-5DWJ□N
510g
LA6-5DTN□N
530g
LA6-3DWJ□B
450g
LA6-5DWJ□B
560g
3600Hz, Continuous beep sound
2400Hz&3375Hz, 0.25sec/0.25sec
Mass
(±10%)
LA6-3DTN□B
480g
LA6-5DTN□B
590g
LA6-3DTN□N
420g
Standby Current
Max. 15mA
500VAC applied for 1 min between terminals and chassis without breaking insulation
4000Hz&4800Hz, 0.5sec/0.5sec
Alarm Sound
2400Hz, Continuous beep sound
Alarm Sound No.1 measured from the front direction of the alarm opening at 1m
Sound Level
Max. 85dB
Model
Flashing Rate
60±2 Flashes Per Minute
Signal Wire Current
Display Color
(Typical Luminous Intensity)
Red(1000mcd) Amber(1700mcd) Green(2600mcd) Blue(1000mcd) White(1250mcd)
Purple(800mcd) Pink(850mcd) Lemon Yellow(2150mcd) Cyan(2150mcd)
RoHS Directive (EN 50581)
2400Hz&3600Hz, 0.25sec/0.25sec
Data Programming
Application Software
Exclusive Application Software
Environmental Condition
Volume Control
4 steps in volume selection from Setup Pushbutton (Factory Default: Max.)
Max. - 5dB of Max. (APPROX.) -10dB of Max. (APPROX.) OFF
Remarks
CE Marking Compliant
UL Recognized Component (File No.E215660), Maximum Surrounding Temperature Rating 60℃
More than 1MΩ at 500VDC between the terminals and the chassis
Insulation Resistance
Protection Rating
Environmental Condition
Vibration Resistance
LA6-□□TN□□
Spot：Acceleration 10m/s
2
(57.5〜150Hz)
IP65(Alarm specification: IP54) IEC 60529
Upright Installation
Indoor Only
JIS C 60068-2-6：2010
LA6-□□LJ□□
Sweep：Amplitude 0.30mm p-p(10〜57.5Hz), Acceleration 20m/s
2
(57.5〜150Hz)
Spot：Acceleration 20m/s
2
(57.5〜150Hz)
LA6-□□WJ□□
Sweep：Amplitude 0.30mm p-p(10〜57.5Hz), Acceleration 20m/s
2
(57.5〜150Hz)
Less than 90% (No Dew or Condensation)
Upright
Storage Ambient Humidity
Horizontal
Inverted
Mounting Location
Mounting Direction
Less than 90% (No Dew or Condensation)
- 25℃ 〜 + 60℃
Operating Ambient Humidity
Storage Ambient Temperature
Operating Ambient Temperature
- 25℃ 〜 + 60℃
Rated Voltage
Max. 70mA
24V DC
Operating Voltage Range
±10% of Rated Voltage
LA6-3D□□N-YYY
4.5W
Typ.
Environmental Condition
Rated Power
Consumption
LA6-5D□□B-YYYYY
8W
LA6-□D□□□-□ (Refer to "2. Model Number Configuration")
Alarm Sound No.1 at Maximum Volume
LA6-3D□□B-YYY
5.5W
Max.
LA6-5D□□N-YYYYY
7W
LA6-5D□□B-RYGBC
6.5W
LA6-3D□□B-RYG
4.5W
LA6-5D□□N-RYGBC
5W
LA6-3D□□N-RYG
3.5W
Environmental Condition
Upright Installation
Main Unit
USB micro-B Female
Interface：USB2.0/1.1, Transmission speed：USB2.0/1.1/1.0
Transfer
cable
Micro USB cable (Not included), Data transfer/Chage cable
Connector type：USB Male (Type.A) - USB Male (Type.MicroB)
Operating Mode
Signal Tower Mode / Smart Mode
Withstand Voltage
Conformity Standards
UL508, CSA-C22.2 No. 14
EMC Directive (EN 61000-6-4, EN 61000-6-2)
FCC Part15 SubpartB Class A
KC (KN 61000-6-4, KN 61000-6-2)
3600Hz, Intermittent at 0.05sec
2400Hz, Intermittent at 0.05sec
2400Hz, Intermittent at 1.5 sec
2400Hz, Intermittent at 0.5sec
3600Hz, Intermittent at 1.5 sec
3600Hz, Intermittent at 0.5sec
Data Transmission
Interface
(Typical Frequency)
(Downloadable from Home Page)
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
