ASSEMBLY STEPS
D
E
D
E
E1
D
E
E1
D
E
D
E
E
E1
D
E
E
E1
Step 1
：
Match the two(2) holes of parts E and
D and insert with M6x35 twist by L . Do not
fully tighten all screws until assembly is
complete.
Step 2
：
Match the two(2) holes of parts E and
D and insert with M6x35 twist by L . Do not
fully tighten all screws until assembly is
complete.
Screws Assembly Steps
match the two different
holes
insert screws
- 6 -
tighten the screws by
included wrench
Important:
Do not fully tighten all screws until assembly is complete.
Step 3
：
Match the four(4) holes of parts E1
and E .Insert with M6x15 and tighten all the
screws.Ensure the table is stable,then place
the glass on top.
