1
GENERAL INFORMATION:
Your new Bench is made from the finest materials available. It should provide many years of enjoyment
with minimal care.
Keep your Bench clean and apply a coat of wax a few times a year. For best results, clean the Bench
with warm soapy water and use an outdoor furniture wax. If you use furniture covers, always make
sure the Bench is clean and completely dry before covering as mold may form in dark, wet places. Check
the bolts on your Bench regularly to make sure they are tight.
To provide a rust free product this Bench is made of Cast Aluminum which is a relatively soft material. Be
careful not to over tighten your hardware. Stripped hardware is not covered under the manufacturer's
warranty. The weight limit for this Bench is
400
lbs.
SAFETY INFORMATION:
DO NOT tighten bolts completely until instructed to do so. After final alignment, make sure all nuts and
bolts are securely fastened.
NEVER use a power tool to assemble or tighten your furniture. Perform periodic checks to make sure the
hardware is secure and tighten if needed.
CAUTION
READ all instructions before beginning assembly. Failure to do so may result in faulty assembly and
potential injury. Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid
damaging the item.
PREPARATION
Before beginning assembly, make sure all parts are present. Compare parts received with the "Parts
List." If any part is missing or damaged, do NOT attempt to assemble the product. Contact our Customer
Service
WARNING
DO NOT stand or allow children to stand on the assembled product.
CAST ALUMINUM BENCH
