Contact us for assistance: (866) 985-7877 | www.wtliving.com
3
aSSEMBLY
ILLUMINATION
The bistro table features an integrated light source embedded in the center
of the table surface. To access the battery housing, make sure the switch
on the side of the table is turned to OFF (“I”), then turn the table over on a
soft surface such as a towel or carpet. Locate the tab holding the housing
closed and remove the round panel in the center of the underside of
tabletop.
The table requires three AA batteries inserted with alternating polarity as
shown in the diagram above. Please replace only with new or fully charged
rechargeable batteries. Avoid mixing battery brands, or old and new
disposable batteries, or partially-charged and fully-charged rechargeable
batteries. Replace battery cover door after changing batteries.
Although the table can withstand incidental dampness such as beverage
condensation, the battery housing is not weatherproof. To extend the
functionality of the illumination feature, your table should be covered or
stored when not in use.
