4
ITEM 61940, Campeche All Weather Wicker 5 Piece Bistro Set
ASSEMBLY
TABLE
1.
Lay the Table Top flat on a soft, level surface. Align the hole in the top of the
Leg with the hole found on the underside of the Table Top and insert 1 – M6x16
Bolt (AA) through 1 – M6 Lock Washer (CC) and 1 – M6 Washer (DD) and through
the holes in the Leg and Table. Loosely tighten with wrench. Repeat with the
other 3 – Legs. (NOTE: DO not fully tighten yet as you may need to adjust the
Legs to allow the Table Ring to affix properly in Step 2.)
2.
Align the holes in the Lower Table Ring with the holes in the Legs. Insert 1 –
M6x30 Bolt (BB) through 1 – M6 Lock Washer (CC) and 1 – M6 Washer (DD) and
through the holes in the Lower Table Ring and Leg. Repeat with the other 3 Legs.
Tighten securely with wrench and then go back and tighten all hardware.
3.
Carefully turn the table up onto the legs. Your table is now ready for use!
