Model 1006 24-Channel
Analog to DMX
Manual
1006-200-REV1
04/25/19
TM
Pathway Connectivity Solutions
#103—1439 17Avenue SE Calgary AB
Canada T2G 1J9
www.pathwayconnect.com
tel (403) 243-8110 fax (403) 287-1281
•
Power input: 9-30VDC, 5W maximum
•
250V Fault protection on DMX input
•
1500V Opto-isolation between DMX signal and analog/
contact inputs
•
Connections (DMX):
•
Compression Fit (Screw Terminal): stranded, 14-30 AWG
•
IDC Connector: Cat5/6 or solid wire, 22-24 AWG
•
Input Signal: ANSI E1.11 DMX512-A, ANSI E1.20 RDM
•
Outputs: ANSI E1.11 DMX512-A
•
Analog/Contact Inputs:
• Do not exceed 10VDC input when set as analog
inputs.
• Do not connect voltage sources when set as contact
inputs.
Exceeding this rating may result in personal injury
and/or equipment damage to this and other connected
devices.
•
0.7 lbs (0.316 kg)
•
6.25”W x 4”H x 1.55”D (159mm x 103mm x 40mm)
ELECTRICAL INFORMATION
PHYISCAL
•
ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
•
ANSI E1.20 RDM(2010) - Remote Device Management
•
ANSI E1.3 0-10V Analog Control
•
RoHS 2011/65/EU
•
CE
COMPLIANCE
