PDM2I60-PS900 Driver Module Remote Mounting
PLED18-900-8
G
CAUTION:
The driver module is designed to cool by
natural convection and consequently,
when mounted inside a cabinet or
enclosure, must be mounted vertically. It is
also imperative that the enclosure be
adequately ventilated.The case
temperature of the module must be
0
maintained at or below 75 c when running
at max output otherwise the useful life
expectancy will be severely degraded and
the warranty rendered void.
To ensure compliance with this limitation
sample measurements of driver case Tc
must be taken post installation and
recorded on the warranty checklist
document.
Typical ‘Unistrut’ Set Up
Interconnect units using appropriate Liquid
Tight glands and conduit(Not Supplied)
109,00
44,00
262,00
3
1
2
,0
0
242,00
37,00
198,00
2
0
6
,0
0
4
4
,0
0
Tc Measurement point
31mm
OUTPUT
170mm
OUTPUT
2020 Pled Australia Pty Ltd. All rights reserved. For informational purposes only
PATHFINDER
LED
Lighting the way
