3
Introduction to Appearance of Mouse and Receiver
In addition to the two sets of buttons on the Fantasy Mouse, it offers a third set of
wheel keys, and a set of lights in front of the wheel keys to remind the users for the
low level of the battery. The wireless receiver has a set of buttons, in addition it also
has a set of simple LED and two sets of lights, such LED shows in hexadecimal 0-F
indicating the current channel used to the user.
Basic Installation of the Mouse
In addition to plugging the PS/2 connector of the wireless receiver to the PS/2 socket
of the main computer system (it should be done before power on), we still need to
remember to put a No. 3 battery in the battery slot in the bottom of the mouse due to
the wireless signal transmission requires electric power for proper operation.
Switching Wireless Channel
Since the Fantasy Mouse can support a total of 13 wireless channels, users can select
their channels by themselves. To switch channels, we need to simultaneously press
three sets of buttons (including the wheel). When the other set of lights are lit, we can
start to change channels. Then press the right button to switch channels, and the
channels are changing in the hexadecimal sequence from 0 to F. After the selection
completes, press the left button to start using such channel for operation.
Insufficient Battery Indicating Light
The light disposed in the front of the wheel button will be lit automatically when the
voltage of the battery in the mouse is lower than the output signal 1.1V. It reminds
the users to replace new battery.
