© 2015 Patch Products, LLC. All Rights Reserved.
Page 17
Replacing the Batteries
If the night-light becomes too dim or the
sound is not clear, it’s time to change the
batteries. First remove the electronic module
from the Owl plush. Use a Phillips head
screwdriver to open the battery cover. Insert
three AA (LR6) batteries in the battery
compartment and replace the cover. Place
the module back inside the Owl, making sure
to align the two pieces of hook tape on the
front of the module with the mating loop
tape inside the plush. This keeps the lights
centered in the Owl’s face.
Washing Instructions
Do not wash the Owl with the electronic
module inside.
Open the back of the owl
and remove the electronic module. Place the
Owl plush in a pillow case and tie closed.
Machine wash in cold water, gentle cycle,
mild detergent, no bleach. Tumble dry in the
pillow case on a low heat setting. Place the
plastic module back inside the Owl plush,
making sure to align the two pieces of hook
tape on the front of the module with the
mating loop tape inside the Owl.
Hook tape
Fig. 19
Front of module
SET
+ AA (LR6) 1.5V -
- AA (LR6) 1.5V +
- AA (LR6) 1.5V +
Fig. 18
Battery compartment