Pasta Del Capitano INN 903, Руководство пользователя

Страница: 8 / 12

8
GB
• Use only the heads recommended by the manufacturer.
• If your toothpaste contains peroxide, baking soda or bicarbonate (common in whitening toothpastes),
thoroughly clean the print head with soap and water after each use, to prevent damage to the plastic.
PRODUCT DESCRIPTION
INSERTING THE BATTERIES:
The sonic toothbrush is operated with 2 alkaline batteries of type 1.5V AAA
• To insert or replace the batteries, remove the battery compartment cover under the handle using a coin or a
screwdriver.
• Insert the batteries according to the polarities in the battery compartment: the two markings should be
opposite one another after locking.
• Close the battery compartment by turning backwards.
WARNINGS:
Always use 2 batteries of the same type and brand.
Do not mix new batteries with the low ones.
If you are not using the device for a long period, remove the batteries.
HOW TO INSERT THE HEAD ATTACHMENT
The brushes can be easily exchanged by plugging on and fitting onto the vibration shaft located in the upper
part of the handle.
Pull up to remove the head from the handle. Insert a new head attachment until it clicks into place.
A gap must remain below the colored ring of the head for the free movement of the brush.
Brush head
Handle
ON/MODE/OFF button