SL600 / SL600E Lock User Guide
4.3.2 Assigned Mode (Permanent Use)
The initial status of the lock in Assigned Mode is closed status (latch out)
①
Touch to wake up the lock.
②
Put the User Card to the front body of the assigned lock.
③
Lock checks the card, if the key of the user card is correct, Lock will emit green LED lights
and beep sound once. Then, lock will be opened, and closed again in 5 seconds.
④
To close the locker, just close the door. Lock will remain the closed status.
4.3.3 Replacing old User card with New User card
(1) Free Selection
①
Issue new user card by LOS (Locker Operation System) program.
②
In case the locker is closed, put Master Card to the lock to open the lock.
③
Put new User card to the lock, then lock will accept new User card, and missing card will not
be accepted.
④
In case the locker is opened, just put the new user card to the lock, and the lock will register
this new user card key. Old User key will not be accepted.
(2) Assigned Mode
①
Issue new User card (with assigned locker Number) for Assigned mode.
②
Put Master Card to the lock to delete the old user card, and put the new User card to the
lock.
③
Lock will accept the new user card only, and old user card registration will be deleted.
④
In case the lock is set for multiple users, lock revision should be updated when new user
card is issued by LOS program. Then, Lock updates it’s revision number when new user
card is scanned. The other user cards which are assigned to this locker also needs to be
reissued with updated lock revision by LOS program.
4.4 Maintenance card
①
Program Maintenance card as you want from LOS (or online client software)
②
Put Maintenance card to each lock, lock will be set as you programmed in step 1.
③
Time of the lock, Master cards change, Wireless online channel, Auto status update, etc
can be updated with Maintenance card
