Version 1.0
- 5 -
3. Lock Operation
PT300 can be accessed with both RF tags or Pin code.
3.1 Assigned Mode
(1) Open & Close by Pin Code
Default Pin Code :1234
Open
：
+ “4 digit
Pin Code
”+
Close
：
Automatic close after several seconds ( Full cycle latch )
Change Pin Code
：
+ old Pin Code + + new Pin Code + + new Pin Code +
Pin Code can be changed only when the lock is under
unlocked status.
(2) Open & Close by RF card key
RF card key can be used together with Digital Pin Code anytime.
+ Put User Card on the Lock.
When user uses the RF card key, default Pin Code 1234 will be erased from
the lock. However, User Pin Code will not be deleted.
When user wants to set new Pin Code, the process is same as in
“
Change
Pin Code
”
while lock is in unlock position. Default Pin Code 1234 cannot be
used any more.