FX100 User Guide
Version 1.0 5
2. Types of Lock Operating Scenario
FX100 locker locks are designed to work for the various operation requirements by simple set up
process. Following operation modes can be programmed before or after lock installation.
2.1 Free Selection (Shared Use)
- User card is not assigned to any certain lock but
User is free to select any empty locker to occupy.
- Programmable to make LED lamp blinked to
represent locker is in use. (In-use lamp)
- Programmable to use multiple lockers (up to 5)
with one User card. (Multi-lock)
- Programmable for Time based operation.
2.2 Assigned Mode (Permanent Use)
- Each locker is assigned to each User card
in advance.
- Programmable to use multiple lockers (up to 5)
with one User card. (Multi-lock)
- Also, programmable for multiple user cards (up to 8)
to one locker. (Multi-user)
2.3 Smart Assign mode (Shared or permanent use)
- User can select any empty locker and the user is assigned to the chosen locker.
- Without the help of administrator, user can freely change the assigned locker to any empty locker.
- Programmable to make LED lamp blinked to represent locker in use.
- Programmable to set specific time to release the assigned locker to empty locker after the
changing the locker.