Enclosure Components:
B)
Baffle
C)
2 x
Side Panel
D)
Back Panel
E)
2 x
Top/Bottom Panel
F)
Brace
Enclosure Assembly:
1)
First, before gluing anything, do a dry fit of the enclosure to familiarize yourself
with the parts and assembly. This will also give you a chance to ensure that all pieces have
been cut properly.
2)
Next,
set the enclosure parts out on a flat level surface and ensure that all pieces are
free of dust and debris.
3)
Start with the
Back Panel
(
B
) lying flat with the rabbeted side up, as shown.
