Pass INT-60, Руководство пользователя

Страница: 4 / 10

4
Quick Setup:
Unpacking your INT-60
The INT-60 is heavy - please make sure you have help to remove the INT-60 from the
packing and to place the amp where you want it.
Included in the box are a remote control and a power cord. You will need these so
don’t throw them away with the empty box. In fact you should keep the empty box
as well.
Place the amplifi er close to where you intend to use it. Just leave enough access so
you can connect the inputs and speaker cables.
Plug in the amp into the AC. Turn on the AC power switch. At this point you should
have the blue LED in the center of the meter on. Push the “power” button on the
faceplate a few times. The amp should cycle on and off (display and meter lights will
come on and go off).
Turn the amp “off” from the faceplate. Now you should be ready to connect your
sources and speakers.
Quick Connections:
Connect your sources to the inputs. There are four inputs, two with XLR and RCA and
two with RCA only. The XLR and RCA inputs on INPUT 1 (and INPUT 2) are connected
so use XLR or RCA but not both. When using INPUT 1 & 2 with RCAs you should have
the XLR shorting jumpers in place.
The Preamp Outputs can be used to drive a second system, a sub-woofer or other
amplifi ers for bi-amping. These output are live when the amp is live and MUTED when
the amp is MUTED.