Pass INT-25, Руководство пользователя, Страница: 5 / 7

4 5
1. Standby Power button 2. Display - shows level 3. Input buttons (1 thru 3)
4. Mute button 5. IR Window 6. Volume control
7. LED Indicators
volume
display ext amp on
pass thru
balance
tape
3
mute
5 4
2 1
power
PASS
Remote functions:
power: Standby ON or OFF
mute: Mutes the output of the amplifier and
preamp
1,2,3: Direct input selection
volume: adjusts the output level
Note: Grayed out functions are not available on INT-25
Basic Operations:
Power on / Off:
Once the INT-25 is turned on from the rear power switch, the
INT-25 can switch into standby mode from the front panel power
switch or the power button on the remote. In StandBy the INT-
25 draws less than 0.5 watts.
Front Display:
The LED display show volume level in one dB steps, from 0 to 63.
Input selection:
The inputs can be selected by the Three buttons on the face plate or the input buttons (1-
3) on the remote.
Volume control:
The volume level can be set by using the volume control knob on the face plate of the
volume buttons on the remote
Mute:
The INT-25 can be muted from the front panel or remote. When in MUTE the display
shows “00” and the LED above the MUTE button on the faceplate will be on.
1. AC Power Switch 2. F
use
3. AC Mains Inlet 4. Speaker Terminals 5. Inpu
ts
1 3
2
4 5
1 2
3
R
L
Left Right
Pass Laboratories, Auburn, CA 95602
!
CAUTION
Risk of electrical shock
Do Not Open
AC Mains:
120V
100V
220-240V
Slow Blow
T5 A L250V
T2.5 A L250V
Replace with the correct
type and value fuse.
= 2000m
~ AC Mains 50/60 Hz. 300W
INT-25
POWER INPUT1 INPUT2 INPUT3 MUTE
INT-25
2
1 3 4 5 6 7