Visit our website for FAQs: www.passandseymour.com
ADVANCED OPERATION
Groups
You can use the Group feature to control multiple LightSense™ wireless fan
controls from one location. Binding the fan controls together in the same Group
enables them to work in exactly the same way, from any of the control
locations.
You can also Group one or more LightSense PSWCS Wireless Multilocation
Controllers with a single fan control to control one fan circuit from multiple
locations.
You can include other LightSense wireless devices in the Group. Just
remember that all devices in the Group operate when one member operates. If
you group a dimmer with a fan control, the fan speed will increase when you
increase the brightness from the dimmer. Conversely, if you press a button on
the fan control to reduce the fan speed, the lights will dim.
Set the House ID (see Set House ID) before setting up Groups.
1. Go to any device that you want to include in the Group. Press
. The
device LED flashes yellow. Devices not currently in the group flash green.
You now have 5 minutes to complete this process.
2. To include or exclude a device in the Group press
on the device until the
LED changes color.
Yellow
flashing LED = Included in the Group
Green
flashing LED = NOT included in the Group
If you get to a device and it is NOT flashing, see TROUBLESHOOTING.
3. Return to the device used in step 1 and press
to terminate Group
binding. All LEDs revert to solid green.
Scene Control
The LightSense Wireless Fan Control may be easily incorporated into room and
whole house preset scenes. After binding the fan control to the desired scene,
as described in the scene controller installation instructions (PSWCH, PSWCR,
PSWRH, or PSWRR) set the fan speed by pressing one of the speed buttons
or
or
.
Note that the PSWCR and PSWRR wireless room scene controllers’ default
operation for the E scene button and the
paddle does not turn off the
PSWCF fan control. You can manually add the fan so that it is included when
“all off” function is invoked at the room scene controller.
The
LightSense Installation Guide provides more information about configuring
scenes. Application support information and the
LightSense Installation Guide
are available at www.passandseymour.com.
