®
A i r L i n k R e p l a c e m e n t B a t t e r y
R e p l a c i n g th e B a t te r y
2
Removing the Old Battery
3.
Disconnect the battery plug by pulling it directly away from
the circuit board.
4.
Replace the circuit board in the bottom half of the enclosure
and set both parts aside.
5.
Using a T5 Torx driver, remove the two screws securing the
battery cover.
6.
Remove the battery cover.
7.
Remove the old battery.
Installing the New Battery
8.
Place the new battery in the battery compartment as illus-
trated.
Important:
Do not over tighten the screws.
Tighten them only enough to
hold the battery cover in place.
9.
Replace the battery cover. Be sure to align the notches with
the posts as illustrated.
10.
Secure the battery cover with two screws.
11.
Observe the correct orientation of the battery plug and wires
illustrated below.
Important:
Do not connect the battery backwards.
The battery may be
damaged if it is connected incorrectly.
12.
Connect the battery plug to the circuit board as illustrated.
disconnect battery plug
bottom half
remove screws
top half
remove old battery
new battery
align
notches
black
blue
red
bottom half
