Paso Sound Products WPSS150M Скачать руководство пользователя страница 28

Страница: 28 / 32

-27-

2.Making changes to Battery selection:

Use UP or DOWN button to go to the Battery selection page.

Press SET for about 2 seconds to activate the cursor. Press UP or DOWN button to move

the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery) position.

When the desired option has been selected, press SET for about 2 seconds to save and

store the data in the memory.

Remark : "NiMH" must be selected when rechargeable battery is being used. Never select

"AKLN" (Alkaline) when transmitter is intended for charging as Alkaline battery can not be

charged ! Wrong selection of battery will cause battery sensing electronics to display wrong

information and mislead charging status.

3.Input Level Gain Control Adjustment

Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated

inside the transmitter. Gain controls are adjustment ports that enable you to use

microphones of differing output levels and Guitar or instruments with Hi-Z output. To

adjust microphone (Lo-Z) input levels, turn the "MT" control and to adjust the Guitar or

instrument (Hi-Z) input, adjust the "GT" gain control to set the transmitter's desired audio

input level.

FCC Caution

To assure continued compliance, any changes or modifications not expressly approved

by the party responsible for compliance could avoid the user's authority to operate this

equipment. (Example - use only shielded interface cables when connecting to computer or

peripheral devices.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause

undesired operation.

Содержание WPSS150M

































Результаты поиска

Содержание WPSS150M

Отзывы:

Похожие инструкции для WPSS150M

Бренды по названию

Популярные бренды

Paso Sound Products WPSS150M, Руководство по эксплуатации

Результаты поиска

Содержание WPSS150M

Отзывы:

Похожие инструкции для WPSS150M

Бренды по названию

Популярные бренды