13
An Illinois Tool Works Company
155 Harlem Avenue
Glenview, Illinois 60025
TOOL WARRANTY AND LIMITATIONS
TOOL WARRANTY
Paslode
®
warrants that newly purchased power
fastening tools, parts and accessories will be free
from defects in material and workmanship for the
period shown below, after the date of delivery to
the
original user.
ONE-YEAR FULL WARRANTY
A one-year warranty will apply to all parts.
FIVE-YEAR EXTENDED LIMITED WARRANTY
WARRANTY STATEMENT
Thiswarrantyislimitedtotoolssoldandservicerequested
in the United States. To obtain information on warranty
service in the United States, refer to the Service Center
listing that was provided with your tool.
Paslode's sole liability hereunder will be to replace any part
or accessory which proves to be defective within the specific
time period. Any replacement part or accessory provided in
accordance with this warranty will carry a warranty for the
balance of the period of warranty applicable to the part it
replaces. This warranty does not apply to part replacement
required due to normal wear.
This warranty is void as to any tool which has been subjected
to misuse, abuse, accidental or intentional damage, use with
fasteners,fuel,batteries,orbatterychargersnotmeeting
Paslode specification, size, or quality, improperly maintained,
repairedwithotherthangenuinePaslode replacementparts,
damagedintransitorhandling,orwhich,in Paslode’s opinion,
has been altered or repaired in a way that affects or detracts
from the performance of the tool.
PASLODE MAKES NO WARRANTY,EXPRESSED OR
IMPLIED, RELATING TO MERCHANTABILITY, FITNESS,
OR OTHERWISE, EXCEPT AS STATED ABOVE, and PAS-
LODE's liability AS STATED ABOVE AND AS ASSUMED
ABOVE is in lieu of all other warranties arising out of, or
in connection with, the use and performance of the tool,
except to the extent other wise provided by applicable law.
PASLODE SHALL IN NO EVENT BE LIABLE FOR ANY
DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES,
INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH
MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS, INCREASED
COST OF OPERATION, OR OTHERWISE.
A five-year warranty will apply to all housing and
cap assembly castings.
®
®
®
