![background image](http://html1.mh-extra.com/html/paslode/im250a-li2/im250a-li2_operating-manual_3979634018.webp)
17
Servicing
When you get home:
1. Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2. Wipe your Cordless Finish Nailer with a clean, soft
cloth.
3. Remove and clean the filter every two days.
4. Check No Mar Probe to ensure it is operating freely.
Paslode Cordless Tool Accessories
e
d
ol
s
a
P
e
h
t
r
o
f
el
b
al
ia
v
a
e
r
a
s
ei
r
o
s
s
e
c
c
a
f
o
y
t
ei
r
a
v
A
Cordless 16 Gauge Angled Lithium-ion Finish Nailer:
No-Mar Replacement Tip
Single Tip - Part No. 902425
Three Pack - Part Number 902473
Battery - Part No. 902654
Tool Cleaner - Part No. 219348
Clear Safety Glasses - Part No. 401382
Paslode Cordless Lubricating Oil - Part No. 401482
Battery Charger - Part No. 902672
Paslode Cordless Finish Nailer Case - Part No. 905640
Contact your Paslode® representative for additional
information.
Tools
A 9/64 Hex Wrench (Part No. 900736) is provided with
each Cordless 16 Gauge Angled Lithium-ion Finish Nailer.
End-of-Workday Routine
These simple steps are based on maintaining the safety and
operational efficiency of the Cordless Finish Nailer.
Before you leave the work site:
1.
e
h
t
e
s
u
s
y
a
w
l
A
.
e
s
a
c
l
o
o
t
n
i
e
r
o
t
s
d
n
a
y
r
e
tt
a
b
e
v
o
m
e
R
Cordless Finish Nailer case for transporting and storing
the tool.
2.
Dispose of all empty fuel cartridges. Remember to
dispose of these fuel cartridgeas where they will not
be crushed, punctured, burned or found by children.
For technical support call:
1-800-222-6990
or email:
CLEANING THE AIR FILTER
Use a flat bladed screwdriver to
remove cap, ease locking tabs
open to avoid damage to cap.
Make sure fuel door is open, then
remove filter cover.
Remove filter. Check filter for
holes, replace if needed.
Use Cleaner/Degreaser or soap
and water to restore the filter.
Filter will look like new after
cleaning.