8
Battery and Charging System
Inserting Battery
1.
Load the battery, contacts first, into the Paslode Cordless
Finish nailer.
2.
Push battery fully forward into its locked position.
3.
To remove battery, push down on locking tab and slide
battery out.
NOTE: If battery is left in tool for an extended period, the
battery will discharge completely and will require recharging.
IMPORTANT: Should your battery terminals become
corroded and cause poor electrical contact, clean the
terminals using a soft cloth.
Battery Indicator Light
The illustration is a close-up of the side of the Paslode
Cordless Finish nailer handle. On the back side of the
handle is a small plastic lens. This is the battery indicator
light.
When you insert a fully-charged battery into the tool, you will
see a blinking green light. If the indicator light blinks red,
recharge the battery.
BATTERY INDICATOR LIGHT
Clean the
contacts
