![background image](http://html1.mh-extra.com/html/paslode/30-degree/30-degree_cleaning-procedure_761474002.webp)
2
DANGER
Never operate the Paslode Cordless Framing nailer unless all
four Socket Head Cap Screws are firmly tightened on the
cylinder head. Failure to do this could result in tool damage,
fire and personal injury.
Handle-Magazine Removal
DANGER
Remove all fasteners, fuel, and battery prior to servicing tool.
Step 1
Using the 5/32" Hex Key Wrench (# 401331) remove
the
Handle-Magazine Assembly
by removing the two
#10-24 x 1-1/8" long Socket Head Cap screws from the
nose piece of the tool and pivot the
Handle-Magazine
Assembly
away from the
Motor Assembly
.
Step 2
Remove the grille and air filter. Clean them in soapy
water or with Paslode Cordless Tool Cleaner/Degreaser.
Step 3
Remove the cap and air filter by unscrewing the four
#10-24 Socket Head Cap Screws.
Screws
Grille
Filter