6
Now attach the Plastic Rail (F) by
lining up
the two holes on the end with the two guide
holes on the Side Rails (C) as shown in 6a. You
will need a Philips screw driver for this task (not
supplied). Screw
i n place. Repeat f or
other end o f plastic rail. When done s imply
attach the other plastic rail to the other end as
shown.
F
C
A
I
I
F
F
C
B
A
C
A
B
6a
5
Place partially a ssembled unit on i ts s ide as
shown. Line up the second side assembly with
the four dowels and press together.
Ensure the
dowels are fully inserted into the holes. Secure
in place with four
50 mm Screws (G)
as shown.
B
E
G
A
E
E
E
E
B
5a
4
G
E
A
Insert one of the end of the Dowel Cross Rails (E) into the large hole on the side assembly. The
dowel should go into the hole tightly as shown in 4a. Some gentle tapping may be required.
Screwt he dowel into place with a
50 mm Screw (G)
and tighten in place. Repeat for the three
other ends of the dowels.
E
E
E
E
A
B
4a
3
Attach the Curved Base Rail (D) to the leg assembly with four
50 m m Screws ( G)
as s hown. Ensure screws a re t ightened
securely. Repeat for other side.
D
A
B
A
D
G
G
3a
8
7
EN
