PASIAN Lia, Руководство пользователя

Страница: 7 / 50

user manual
ATTENTION: before each use, make sure that the brazier is clean and correctly placed in its seat,
check that the ash drawer is clean and that the firebox door is well closed and airtight. Never open
the door during operation.
It is recommended to always keep the stove, the brazier and the seat of the brazier clean. If the
burner is full of ash, it must be removed, emptied in order to free all the holes and reposition it in its
seat, paying attention to the correct correspondence with the spark plug hole.
Warning: do not get the appliance wet and do not approach electrical parts with wet hands. Do not
vacuum hot ash. All cleaning highlighted in this manual must be done with the appliance cold and
electrically disconnected.
When the stove is switched on, it can cause depression in the room where it is installed and in the
communicating ones, in these rooms there must be no other open flame heating appliances
(boilers, stoves, fireplaces, etc.).
No liability will be accepted for damage, even to third parties, in the event that the instructions for
installation, use and maintenance of the appliance are not followed. Modifications to the appliance
carried out by the user or whoever on his behalf, the use of inappropriate fuels or without the
necessary precautions, must be considered as the total responsibility of the user and invalidate
the guarantee on the product itself, relieving Pasian both in civil law from all responsibility.
The user is responsible for all the operations necessary for maintaining the efficiency of the
equipment before and during its use.
It is absolutely necessary to periodically clean the flue to avoid any fire in the same, in this
situation, move away from the appliance and contact the competent authorities.
Safety valve
On all stoves, on one of the side walls of the combustion
chamber, there is a primary safety valve (anti-explosion). It
is advisable to check that this is always normally closed,
otherwise it can cause bad combustion.
At the end of its useful life, the product must be collected separately from other
mixed urban waste. The user must deliver the product to suitable separate
collection centers for electronic waste often set up by the municipal
administrations. Dispose of correctly, in addition to not polluting the environment,
favors the recovery and recycling of materials.
1.3 INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT
5