Release date: 24.07.18
rev 1.0 18
9 / 9
WARRANCY
THIS PRODUCT IS GUARANTEED FOR 2 YEARS FOR ANY MANUFACTURING DEFECTS. FISCAL DOCUMENT SERVES AS GUARANTEE VALIDITY.
Technical support:: +39 0141 - 947676
The informa"on in this guide are purely for informa"on purposes, therefore, are subject to change without no"ce. At the "me of publica"on the informa"on is
correct and reliable. However Paser can not be held responsible for any consequences resul"ng from errors or omissions in this manual. Paser reserves the
right to improve / change the product or manual without obliga"on to no"fy users.
POWER THE PARKING SENSOR CONTROL UNIT FROM THE REVERSE LAMP, FOLLOW THE PDC INSTRUCTION MANUAL.
SYSTEM WORKS WITH THE IGNITION ON.
SYSTEM STARTS TO WORK BY INSERTING THE REVERSE AND IT SWITCHES OFF BY REMOVING THE REVERSE.
IF YOU NEED TO INSTALL THE SAME UNIT IN A NEW CAR, IT IS NECESSARY TO RESET THE MODULE.
RESET:
1.
WITH THE UNIT POWERED, PRESS AND KEEP PRESSED THE UNIT BUTTON TILL THE LED SWITCHES OFF.
2.
WITH THE LED SWITCHED OFF, RELEASE THE BUTTON: THE RESET IS DONE.
ATTENTION
TECHNICAL CHARACTERISTIS
POWER
10/16 VDC
SLEEP MODE ABSORPTION
<1 mA
WORKING MODE ABSORPTION
100 mA
TROUBLESHOOTING
Parking Sensor UNIT
PROBLEM
CAUSE
SOLUTION
The system doesn’t work when the back gear is
inserted.
Wrong connecBon of the power wires
Power the parking sensors by the reverse gear light
Wrong connecBon of the plugs
Verify the connecBon of the connectors of the
parking system
The system detects always the obstacle
The system detects the ground
Verify that the sensors caps are installed horizon-
tally respect the ground.
Caps sensors are varnished
incorrectly
Verify that the caps varnish layer is not too thick.
In this case the sensors can detect it as an obsta-
cle.
The test is made in closed space
Please make the test of the system in an open
space and not into a close room.
The sound of the buzzer is not available
BUZZER not connected
(only for VW cars)
Check the connecBon between Buzzer
and parking sensors Unit
Wrong connecBons of the caps sensors
Please control the caps sensors connecBon
PARKWIEW
PROBLEM
CAUSE
SOLUTION
The unit doesn’t manage any funcBon and the
LED is OFF.
Wrong connecBon of the power wires
Verify the power connecBons
The unit is right connected but it doesn’t manage
any funcBon and the LED is OFF.
Wrong connecBon of the CANBUS wires
Verify the CANBUS connecBons
The unit is right connected and the LED blinks
RED quickly.
CANBUS protocol unknown or upgraded by the car
manufacturer
The unit is not able to synchronize the CANBUS
protocol; please contact the distributor
The unit is right connected and the LED blinks
RED irregularly.
Wrong connecBon of the CANBUS wires
Verify the CANBUS connecBons
The unit is right connected and the LED switches
on RED.
CANBUS protocol unknown or upgraded by the car
manufacturer
The unit is not able to synchronize the CANBUS
protocol; please contact the distributor
PARKVIEW CF0006UNPS61
CANBUS MODULE TO VIZUALIZE PDC ON CAR DISPLAY
Cobra R294 - R394 / Paser AFR294 - AFR394/R
INSTALLATION MANUAL
45’
