PASECO KERONA WKH-100A, Руководство пользователя

Страница: 11 / 16

10
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
Install the new wick and insert
the 3 pins on a new wick into the
3 holes on the wick sleeve in the
upward direction.(See the arrow
marked "up" on the wick sleeve) Push the new wick into the
retainer teeth of the wick sleeve
so that the wick adheres tightly
around the inside of the wick
sleeve, smoothing out any
wrinkles.
Turn the wick adjustment knob
and check to be sure that the
wickmoves up and down freely. Slide the wick adjuster assembly
down the draft tube.Position the
adjuster shaft to the front of the
heater.
Check height of wick. It should be
5/16 above collar. Check for correct clearance
between wick holder and draft
tube. It should be the same all
around.
Reinstall the automatic ignition
assembly. Reinstall the wind cover.
Check the function of safety
shut-off mechanism by pushing
the extinguish button to upset the
pendulum.
Snug 4 wing nuts on the
mounting stud but do not
tighten.Raise the wick to the full
up position, and evenly tighten
wing nuts in several steps.
Line up the pins with the slotted
holes inside the wick adjuster.
Then lightly press each of the
three pins of the wick (now
attached tothe wick sleeve)
toward the inside insert the three
pins into the slanted grooves of
the wick adjuster. Press on each
of the three pins, inserting them
securely in the holes.
UP
Hole
Pin
5/16"
All manuals and user guides at all-guides.com
all-guides.com