3
Introduction and Warranty
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USING THE TOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
This Cordless Nailer should be handled like other
power fastening tools that you use. Like most tools, when
used improperly injury could result. If you are going to
allow others to use this Cordless Nailer, it is your
responsibility to make sure that they also read and comply
with the instructions in this manual before attempting to
operate the tool.
Should you have questions about this Cordless Nailer,
or wish to obtain additional copies of this manual,
please contact your Paslode
®
Representative.
The space below is provided so that you may record
your representative's name, address, and telephone
number.
Name
Address
City
State
Zip
Telephone Number
Paslode Cordless 1-1/2"
Positive Placement
®
Nailer
Operating Manual
Paslode Cordless Warranty and Limitations
Paslode warranties that new Cordless power fastening tools,
parts and accessories will be free from defects in material and
workmanship for the period shown below, after the date of
delivery to the original user.
FIVE-YEAR EXTENDED LIMITED WARRANTY
A five-year warranty will apply to all molded nylon parts:
• Motor Housing,Cap and Grille
• Handle Halves and Actuator
• Trigger
WARRANTY STATEMENT
This warranty is limited to tools sold and service requested in the
United States. To obtain information on warranty service in the
United States, refer to the Service Center listing that was provided
with your tool.
Paslode's sole liability hereunder will be to replace any part or accessory
which proves to be defective within the specific time period. Any replacement
part or accessory provided in accordance with this warranty will carry a
warranty for the balance of the period of warranty applicable to the part
it replaces. This warranty does not apply to part replacement required
due to normal wear.
This warranty is void on any tool which has been subjected to misuse,
abuse, accidental or intentional damage, use with fasteners, fuel,
batteries, or battery chargers not meeting Paslode specification, size, or
quality, improperly maintained, repaired with other than genuine Paslode
replacement parts, damaged in transit or handling, or which, in Paslode's
opinion, has been altered or repaired in a way that affects or detracts from
the performance of the tool.
• Magazine Parts
battery and charger system) which have failed during normal
CORDLESS 2 YEAR SERVICE PROMISE
Paslode will service the tool and replace all parts (including
use for FREE, for a period of 2 years from date of purchase.
For 2 Year Service Promise details and limitations see
servicepromise.paslode.com.
PASLODE MAKES NO WARRANTY, EXPRESSED OR IMPLIED,
RELATING TO MERCHANTABILITY, FITNESS, OR OTHERWISE,
EXCEPT AS STATED ABOVE, and Paslode's liability AS STATED ABOVE
AND AS ASSUMED ABOVE is in lieu of all other warranties arising out of,
or in connection with, the use and performance of the tool, except to the
extent other wise provided by applicable law. PASLODE SHALL IN NO
EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL
DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGES WHICH
MAY ARISE FROM LOSS OF ANTICIPATED PROFITS OR
PRODUCTION, SPOILAGE OF MATERIALS,, INCREASED COST OF
OPERATION, OR OTHERWISE.
Paslode reserves the right to change specifications, equipment, or designs
at any time without notice and without incurring obligation.
This manual is intended to acquaint you with the Paslode
Cordless 1-1/2” Positive Placement
®
Nailer. Unlike other
power fastening tools, this Cordless Nailer is powered by
an internal combustion linear motor. In simpler terms,
your Cordless Nailer is powered by a motor similar to the
one that powers an automobile. This Cordless Nailer
ignites a fuel and air mixture to product the energy to
power the motor, which in turn drives the fastener. This
Cordless Nailer is totally self-contained. It carries its own
fuel supply and battery, along with a supply of fasteners.
For ease of use, this manual is divided into sections (see
Contents). Each section of the manual is written with you,
the tool operator, in mind. We have left out many of the
technical terms so that you can easily understand how to get
the maximum performance from your Cordless Nailer, and
how to avoid damaging the tool or injuring yourself. But, to
accomplish this, we need you to do two things:
