pascom PANDORA-3D, Руководство по эксплуатации

Страница: 6 / 36

4. PANDORA-1D/2D/3D
MULTI P.A COMBINATION AMPLIFIER
6. MASTER VOLUME
This knob provides continuous control of the overall system output volume.
7. CHIME BUTTON
Pressing this switch activates the chime circuitry.
8. GRAPHIC EQUALLIZER
Each slider controls the cut(decreased gain) or boost(increased gain) for its associated
frequency band. The middle position indicates flat response (no cut or boost). Moving the slider
upwards increases the frequency's gain, while moving it down decreases the level of the frequency.
9. TUNER SECTION
Radio tuner operating section.
10. RADIO TUNER VFD DISPLAY
You can confirm the working status of tuner through this display.
11. DVD VFD DISPLAY
This vfd display indicates the status of the DVD/USB unit.
12. LED INDICATOR
PHANTOM(Condencor Mic power), PROTECTION , Output Level (CLIP, -6dB, -20dB,
-40dB), Telephone-Paging, REMOTE AMP(DRA-9600) Connection.
★ PROT (PROTECTION INDICATOR)
When the Protection LED ON, THE PROTECTION Circuitry is active, indicating that the unit
is not operating normally. This is typically due to overheating or power limiting. Please check
the input and output condition of the amplifier.
13. SPEAKER SELECT LED
These LEDs indicate the activated speaker.
14. SPEAKER SELECTOR
These swithes are used to individually select audio output to any combination of up to 10 speakers.
15. DVD SECTION
Optical Disc(DVD, VCD, etc,.) and USB operating section.