background image

012-15878A

|

1

|

www.pasco.com - (800) 772-8700

Software: SPARKvue or PASCO Capstone 
Power: Rechargeable Battery

Connection:  

or 

USB

PASCO Wireless Blood Pressure Sensor PS-3218

www.pasco.com - (800) 772-8700

Connection: 

 or USB

012-15878A

|

1

|

Software: SPARKvue or PASCO Capstone 
Power: Rechargeable Battery

PASCO Wireless Blood Pressure Sensor PS-3218

INITIAL STEP -

 

Connect and charge it:

 Use the micro USB cable

to connect the sensor to a USB port or a USB charger (such as PS-
3501). If the cable is connected to a USB 

port

, the Battery status

LED shines yellow to show that the battery is charging. When the
battery is charged, the Battery status LED shines green. If the
cable is connected to a USB 

charger

, the Battery status LED shines

yellow 

and

 the Bluetooth status LED blinks red to indicate that

the sensor is ready to connect to a device (such as a computer or
tablet).

1. Make the Connection:

 Start the PASCO data collection software. 

•    For 

USB connection to a USB port

: Make sure the USB cable is connected. 

In 

SPARKvue

,: Check that the sensor appears on the Home Screen. In 

PASCO Capstone

, select ‘Hardware Setup” and check that the sensor

appears in the “Hardware Setup” window.

•    For 

Bluetooth connection

: If the sensor is not already on, press the ON button at the end of the sensor to turn it on. (NOTE: The following pro-

cedure also works if the sensor is connected to a USB 

charger

.)

In 

SPARKvue

: Select the Bluetooth icon. In the “Wireless Devices” list, select the correct address that matches the XXX-XXX number found

on the sensor. Select “Done”. In 

PASCO Capstone

, select “Hardware Setup” in the “Tools” palette. Select the desired sensor type that

matches the Device ID XXX-XXX number on the sensor. Close the “Hardware Setup” window. 

2. Collect Data: 

In

 SPARKvue, 

select a measurement from the list. A graph of the measurement versus time opens. Select the “Start” button. In

PASCO Capstone: 

Select a display, set up the temperature measurement in the display, and select “Record”.

NOTE: For Educational Use Only.

 

Th

is is not a medical device. It is designed for educational use only and should not be used in any medical

process such as life support or patient diagnosis. The sensor 

is designed by PASCO in California.

Bluetooth LED

ON button

About 3 

hours

Micro USB cable

Device ID

Battery LED

INITIAL STEP -

 

Connect and charge it:

 Use the micro USB cable

to connect the sensor to a USB port or a USB charger (such as PS-
3501). If the cable is connected to a USB 

port

, the Battery status

LED shines yellow to show that the battery is charging. When the
battery is charged, the Battery status LED shines green. If the
cable is connected to a USB 

charger

, the Battery status LED shines

yellow 

and

 the Bluetooth status LED blinks red to indicate that

the sensor is ready to connect to a device (such as a computer or
tablet).

1. Make the Connection:

 Start the PASCO data collection software. 

•    For 

USB connection to a USB port

: Make sure the USB cable is connected. 

In 

SPARKvue

,: Check that the sensor appears on the Home Screen. In 

PASCO Capstone

, select ‘Hardware Setup” and check that the sensor

appears in the “Hardware Setup” window.

•    For 

Bluetooth connection

: If the sensor is not already on, press the ON button at the end of the sensor to turn it on. (NOTE: The following pro-

cedure also works if the sensor is connected to a USB 

charger

.)

In 

SPARKvue

: Select the Bluetooth icon. In the “Wireless Devices” list, select the correct address that matches the XXX-XXX number found

on the sensor. Select “Done”. In 

PASCO Capstone

, select “Hardware Setup” in the “Tools” palette. Select the desired sensor type that

matches the Device ID XXX-XXX number on the sensor. Close the “Hardware Setup” window. 

2. Collect Data: 

In

 SPARKvue, 

select a measurement from the list. A graph of the measurement versus time opens. Select the “Start” button. In

PASCO Capstone: 

Select a display, set up the temperature measurement in the display, and select “Record”.

NOTE: For Educational Use Only.

 

Th

is is not a medical device. It is designed for educational use only and should not be used in any medical

process such as life support or patient diagnosis. The sensor 

is designed by PASCO in California.

Bluetooth LED

ON button

About 3 

hours

Micro USB cable

Device ID

Battery LED

Отзывы: