®
S p e c t r o m e t e r F i b e r O p t i c P r o b e
PS- 2601
2
012-14335A
1.
To turn on the PASCO Spectrometer, press and briefly hold
the ON/OFF button on the right end. After all three status
LEDs blink in sequence, release the ON/OFF button. The
Bluetooth Status LED will blink blue.
2.
Pair /connect to through Bluetooth to your computing
device. This step will depend on your computing device and
operating system. The Bluetooth Status LED will shine blue.
3.
Open the PASCO Spectrometry software.
4.
If the Spectrometer is not found, select “Choose Wireless
Device”.
5.
In the Menu, select the PASCO Spectrometer with the ID #
that matches the ID # on the bottom of the Spectrometer
case.
Fiber Optic Probe Specifications
Spectrometer Specifications
Technical Support
For assistance with any PASCO product, contact PASCO at:
For more information about the product and the latest revision of
this Instruction Sheet, visit the PASCO web site at
www.pasco.com and enter “PASCO Spectrometer Fiber Optic”
or the product number in the Search window.
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Copyright
The PASCO scientific 012-14335A
Spectrometer Fiber Optic Probe
Instruction Sheet
is copyrighted with all rights reserved. Permission is
granted to non-profit educational institutions for reproduction of any part of
this manual, providing the reproductions are used only in their laboratories
and classrooms, and are not sold for profit. Reproduction under any other
circumstances, without the written consent of PASCO scientific, is
prohibited.
Trademarks
PASCO, PASCO scientific, PASCO Capstone, PASPORT, SPARKvue,
and SPARKvue HD are trademarks or registered trademarks of PASCO
scientific, in the United States and/or in other countries. All other brands,
products, or service names are or may be trademarks or service marks of,
and are used to identify, products or services of their respective owners.
For more information visit www.pasco.com/legal.
Product End of Life Disposal Instructions:
This electronic product is subject to disposal and
recycling regulations that vary by country and region.
It is your responsibility to recycle your electronic
equipment per your local environmental laws and
regulations to ensure that it will be recycled in a
manner that protects human health and the
environment. To find out where you can drop off your
waste equipment for recycling, please contact your local waste
recycle/disposal service, or the place where you purchased the product.
The European Union WEEE (Waste Electronic and Electrical Equipment)
symbol (to the right) and on the product or its packaging indicates that this
product
must not
be disposed of in a standard waste container.
Item
Description
Core Material:
Polymetyl - Methacrylate Resin
Core Refractive Index:
1.49
Core Diameter (typical):
980 micrometers (
m)
Maximum Transmission
Loss:
170 dB/km (for 650 nm
collimated light)
Operating Temperature:
-40 to +85 °C
Minimum Bend Radius:
25 millimeters (mm)
Item
Description
Resolution:
2 to 3 nanometers (nm)
Range:
380 to 950 nm
Fluorescence Excitation
Wavelengths:
405 nm and 500 nm
Light Source:
LED boosted tungsten
Address:
PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:
+1 916 786 3800 (worldwide)
800-772-8700 (U.S.)
Web:
www.pasco.com
Email:
