![background image](http://html1.mh-extra.com/html/pasco/pi-9877/pi-9877_instruction-manual_3899216013.webp)
!
Model No. PI-9877
13
T u t o r i a l
A negative period setting causes a descending ramp
6.
Press
(DISPLAY) to display the period.
Turn the Coarse knob to set the period to
–2.00 s (a negative value).
Press
(START) to run the function and
observe the waveform. Note that the nega-
tive period setting makes the ramp descend.
Press
and hold
(STOP).
Press
(DISPLAY) to display the period
again and set it back to
+
2.00 s.
Ramp plays twice and then stops
7.
Press
and hold
(SET); the Time LED
starts blinking fast and the display shows
0
(the “auto-repeat” setting);
while holding
the
button, turn the Fine knob to change the
auto-repeat setting to 2.
Press
(START) to run the function. The
output now completes two ramps and stops
automatically.
A negative auto-repeat setting causes a triangle wave
8.
Press
(DISPLAY) so that the Time LED
is lit. Press
and hold
(SET) and adjust the
auto-repeat setting to –2 (a negative value).
Press
(START) to run the function and
observe the waveform. The ramp now alter-
nates between ascending and descending to
form a triangle wave. It completes two full
cycles and stops automatically.
For more information about the Ramp function, see
page 23.
Содержание PI-9877
Страница 1: ... DC Power Supply PI 9877 Instruction Manual 012 09125A ...
Страница 18: ... DC Power Supply 18 T u t o r i a l ...
Страница 36: ......