®
M o d e l N o . P S - 2 3 4 3
2
display. Adjust the focus ring on the USB Cam-
era as needed.
2.
If a SPARKlab is open, add a new page:
•
Touch or click the
New Page
button.
The new page opens and the
Measure-
ment List
screen shows a name for the
USB Camera (such as “USB Video Device”).
•
Touch or click the
Image
measurement to
select it.
When selected,
Image
is highlighted in orange
and the
Video Image
buttons in the
Tools
pal-
ette become active.
•
Touch or click the large or small
Video Image
button in the
Tools
palette.
A
Video Image
display is added to the
Preview
on the side of the page.
•
Touch or click
OK
.
A new page containing a
Live Image
button in
the center of the display and the
Video Image
button in the lower left of the display is added
to the SPARKlab.
•
Touch or click the
Live Image
button.
In a moment, live video appears in the
display. Adjust the focus ring on the USB
Camera as needed.
Capture
To capture an image of the video display, do the follow-
ing:
•
Touch or click the
Video Image
but-
ton to open the
Video Image Tools
palette.
•
Touch or click the
Check
button in
the Tools palette.
The
Legend
changes to show
“1. Image”. Successive images add
numbers to the
Legend
list.
•
To return to the live video display,
touch or click the
Video Image
but-
ton to close the
Video Image Tools
palette, or
touch or click the
Live Image
button in the
Tools
palette.
More Information
For more information about using a digital video device
with SPARK SLS or SPARKvue, refer to the SPARK
SLS or SPARKvue documentation.
Technical Support
For assistance with any PASCO product, contact
PASCO at:
For information about the USB Camera, enter PS-2343
in the Search window at the PASCO web site.
Limited Warranty
For a description of the product warranty,
see the PASCO catalog.
Copyright
The PASCO scientific
Instruction Sheet
is copyrighted with all rights reserved. Permis-
sion is granted to non-profit educational institutions for repro-
duction of any part of this manual, providing the reproductions
are used only in their laboratories and classrooms, and are not
sold for profit. Reproduction under any other circumstances,
without the written consent of PASCO scientific, is prohibited.
Trademarks
For trademark information visit
www.pasco.com/legal.
Product End of Life Disposal Instructions:
This electronic product is subject to disposal and recycling regu-
lations that vary by country and region. It is your responsibility to
recycle your electronic equipment per your local environmental
laws and regulations to ensure that it will be recycled in a man-
ner that protects human health and the environment. To find out
where you can drop off your waste equipment for recycling,
please contact your local waste recycle/disposal service, or the
place where you purchased the product.
The European Union WEEE (Waste Electronic and
Electrical Equipment) symbol (to the right) and on
the product or its packaging indicates that this
product must not be disposed of in a standard
waste container.
USB Camera
Measurement List in the New Page Screen
Video Image
buttons
Video
Image
display
E-mail: [email protected]
Web:
www.pasco.com
Phone: +1 916 786 3800 (worldwide)
800-772-8700 (U.S.)
Check
button
