background image

®

I n s t r u c t i o n   S h e e t

0 12 -08 00 7G

EKG Sensor

PS

-

2111

*012-08800

Included Parts

1.

EKG Sensor

2.

Electrode patches, 100 pieces

Additional Part Required

PASPORT-compatible interface

PASCO Data Collection Software

Quick Start

1. Connect the EKG Sensor to your PASPORT

interface.

2. If you are using a computer, connect the

PASPORT interface to it and start the PASCO data

collection software.

3. Apply three electrode patches to the subject’s arms

and clip the leads to the electrodes patches as

illustrated in Figure 1.1.

4. Press or click the ‘Record’ or ‘Start’ button to begin

recording data.

Introduction

The EKG Sensor measures electrical signals produced 

by the heart. The EKG trace, displayed on a connected 

computer or datalogger, graphically illustrates the 

beating of the heart. 

Set-up

Connecting the EKG Sensor to an Interface

1. Connect the sensor’s plug to any port of a

PASPORT interfacer. Optionally, use a PASPORT

extension cable (PS-2500) between the interface

and the EKG Sensor.

2. If you are using a computer, connect the

PASPORT interface to it and start the data collec

-

tion software.

1

2

For Educational Use Only! Note: This is not a medical device. It is designed for educational use only and should not 

be used in any medical process such as life support or patient diagnosis. It is also not intended for use in graduate 

research or industry inclu

d

ing industrial control or any type of industrial testing.

Отзывы: