H u m a n S t r u c t u r e s S e t
I n t r o d u c t i o n
2
012-13878A
Other PASCO equipment is closely related to the Human Structures Set.
*See the PASCO catalog or PASCO web site (www.pasco.com) for more information
Introduction
The ME-7001 Human Structures Set is one part of the PASCO Structures System. The Human Structures Set can be used
as a stand-alone set and it can also be combined with other parts of the PASCO Structures System. The set includes all of
the items necessary to build one each of the following: Human Arm Model, Human Back Model, Human Leg Model. A
Load Cell and Amplifier Set (PS-2199) can be added to measure compression and tension forces in the human structure
models.
Related Equipment
Load Cell Amplifier (PS-2198)
- Can plug in up to six Load Cells; requires a PASPORT interface to connect to the USB
port of a computer.
Load Cell and Amplifier Set (PS-2199)
- Load Cell Amplifier (PS-2198) with four 100 N Load Cells (PS-2200).
Included Items
Qty
Included Items
Qty
#6 Beam (36 cm long)
24
Axle (2 each of 3 lengths)
6
#5 Beam (24 cm long)
16
Drive Wheel and Tire
4
#4 Beam (17 cm long)
36
Pulley
12
#3 Beam (11.5 cm long)
36
Collet
24
#2 Beam (8 cm long)
16
Spacer
12
#1 Beam (5.5 cm long)
16
Screw (6-32)
375
Flat Connector
6
Small “O” Ring (1-5/16” OD)
12
Full Round Connector
6
Large “O” Ring (3-5/8” OD)
4
Half Round Connector
56
Nut and Bolt (for PAStrack)
6
Angle Connector
24
Cord Tensioning Clip
32
Sliding Connector
12
Yellow Cord
1 roll
Straight Connector
24
Rubber Cord
1 roll
Recommended Equipment
Recommended Equipment
Hooked Mass Set (SE-8759)
Large Slotted Mass Sets (ME-7566 or ME-7589)
Related Equipment
Related Equipment
PS-2198 Load Cell Amplifier
PS-2201 5-N Load Cell
PS-2199 Load Cell and Amplifier Set
PS-2205 Displacement Sensor
PS-2200 100-N Load Cell
PS-2206 Dual Load Cell Amplifier
PASPORT Interface*
Data Acquisition Software*