Instruction Sheet
for the PASCO
Model ES-9047
012-01525B
10/91
$1.00
Introduction
The PASCO Model ES-9047 Tapered Cylinder and
Plate contains an interesting shape for charge distribu-
tion demonstrations. The tapered conductive cylinder
measures 13 cm high, 6 cm in diameter at the base and
10 cm in diameter at the top. It is attached to a 25 cm
diameter plate by a plastic insulator. Terminals are
provided for electrical connection to both surfaces, the
cylinder and the plate.
Equipmemt Included:
• Cylinder
• Plate
• Insulating Spacer
• 6-32 Nylon Machine Screw
• 6-32 Hex Nut
Additional Equipment Recommended for Use with
the Tapered Cylinder and Plate:
• Power Supply ES-9049A
• Electrometer ES-9054B
• Faraday Ice Pail and Shield ES-9058
• Charge Producers and Proof Plane ES-9057
TAPERED CYLINDER AND PLATE
Assembly Procedure
To assemble your Tapered Cylinder and Plate:
➀
Push the nylon machine screw from beneath
through the center-hole in the the plate.
➁
Slide the insulating spacer over the screw.
➂
Position the tapered cylinder over the insulated
spacer.
Tighten the hex nut over the screw to hold the
assembly.
scientific
Tapered cylinder
6-32 Hex nut
Plate
Insulating spacer
6-32 Nylon machine screw
➃
